If you are using our Laptop CoPilot Version you might experience a hurdle with your GPS receiver. In case you will be asked to set the GPS receiver up anew each time you launch CoPilot, then here are some things you can do.
GPS Receiver Setup for Windows Laptop
During the installation of the build, please make sure to always select "All Users".
If you have installed the build for all users, please do the following:
Apply changes to the "product.cfg"
PATH: C: drive > ProgramData > ALK Technologies > CoPilot v9 Laptop > product.cfg
Open the file with Notepad, Notepad++, or similar and add the following line:
*This value will change depending on the type of GPS receiver you have. See complete list below.
By adding the value to the product.cfg you can change the default setting for the GPS Receiver and point CoPilot to the right direction. We currently have 18 different GPS Receiver classifications.
1 = GPSDevice_Serial
2 = GPSDevice_LogFileRead
3 = GPSDevice_LogFileWrite
4 = GPSDevice_TrackPlayback
5 = GPSDevice_USBTaxan
6 = GPSDevice_Integrated
7 = GPSDevice_Message
8 = GPSDevice_GpsTmc
9 = GPSDevice_BTSocket
11 = GPSDevice_QualcommOmni
12 = GPSDevice_DemoPlayback
13 = GPSDevice_TunnelTripExtrap
14 = GPSDevice_AndroidNMEA
15 = GPSDevice_iPhoneExternal
16 = GPSDevice_Compass
17 = GPSDevice_GPSDLinux
18 = GPSDevice_External
19 = GPSDevice_Socket
If you are not sure about the required value, you can do the following:
1. Launch CoPilot
2. On map screen, go to "Main Menu"
3. Click on "Settings"
4. Select "GPS"
5. Select "GPS Receiver Setup"
6. Once you receive the "Success" message open a File Explorer window, but do not close CoPilot
7. Go to the location: C: drive > ProgramData > ALK Technologies > CoPilot v9 Laptop
8. Open the user.cfg
9. Look for the above-mentioned value